Technical Specifications
Standards
IEEE 802.11b/g/n on 2.4GHz
IEEE802.11a/n/ac on 5GHz
Antenna
Four (4) External 5 dBi Dual-Concurrent Omni-Directional Antenna
SMA-Type
Physical Interface
1 x 10/100/1000 Gigabit Ethernet Ports
1 x Reset Button
LED Indicators
1 x Power
1 x LAN
1 x 2.4 GHz
1 x 5 GHz
Power Source
IEEE 802.11af/at Compliant Source
Power-over-Ethernet: Proprietary 24V PoE
IEEE 802.11e Compliant Source
Active Ethernet (PoE)
Maximum Power Consumption
12.6W
Surge Protection
1KV
ESD Protection
Contact: 4KV
Air: 8 KV
Wireless & Radio Specifications
Operating Frequency
Dual-Radio Concurrent 2.4GHz & 5 GHz
Operation Modes
Access Point Mode (AP Mode)
Client Bridge Mode (CB Mode)
WDS: AP Mode and Bridge Mode (Mesh Mode Coming Soon)
Frequency Radio
2.4GHz: 2400 MHz ~ 2835 MHz
5GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725MHz ~ 5850MHz
Transmit Power
2.4 GHz: 23 dBm
5 GHz: 23 dBm
Tx Beamforming (TxBF)
Radio Chains/Spatial Stream
2×2:2
SU-MIMO
Two (2) Spatial Stream SU-MIMO up to 1267 Mbps to a single client
MU-MIMO
Two (2) Spatial Stream MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously
Supported Data Rates (Mbps):
2.4 GHz: Max 400
5 GHz: Max 867
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 400 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported Radio Technologies
802.11b: Direct-Sequence Spread Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2×2 MIMO with 2 Streams
Channelization
802.11ac supports very high throughput (VHT)—VHT 20/40/80 MHz
802.11n supports high throughput (HT)—HT 20/40 MHz
802.11n supports very high throughput (VHT) under the 2.4 GHz radio—VHT (256-QAM)
802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID
Supports 16 SSIDs (8 SSIDs per band)
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
Cross-band VLAN Pass Through
Management VLAN
QoS (Quality of Service)
Complaint with IEEE 802.11e Standard
Band Steering
RSSI Threshold
Traffic Shaping
Save Configuration as Default
Auto Transmit Power
Auto Channel Selection
Site Survey
PMK Caching
Control Features
Distance Control (ACK Timeout)
Multicast Supported
Fast Roaming
Email Alerts
Wi-Fi Scheduler
Client Traffic Status
Guest Network
RADIUS Accounting
Power Save Mode (U-APSD Support)
CLI Support
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Wireless Security
WEP Encryption 64/128/152 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 64 MACs per SSID
Wireless STA (Client) Connected List
Https
SSH
Client Isolation
Environmental & Physical
Temperature Range
Operating: -4º~140ºF/-20ºC~60ºC
Storage: -22Fº~176ºF/-40ºC~80ºC
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Waterproof & Dustproof
IP67-Rated Enclosure
Device Dimensions & Weights
ENH1350EXT Device
Width: 4.37” (111.2 mm)
Length: 6.83” (173.6 mm)
Height” 1.19” (30.29 mm)
Package Contents
1 – ENH1350EXT Dual-Band AC1300 Outdoor Access Point
1 – Power Adapter (54V/0.6A)
1 – PoE Adapter (EPA5006GR)
2 – Pole-Mounting Brackets
1 – Wall-Mount Screw Set
2 – 2.4GHz 5dBi SMA Antennas
2 – 5GHz 5dBi SMA Antennas
1 – Quick Installation Guide
Certifications
FCC
CE
Warranty
1 Year
