This products is made up of cross linked polyolefin heat-shrinkable tubes,hote melt tubes and Stainless steel needle. It is specifically designed for the protection of fiber optical closure.

Description

Length of Tube

60mm

Outer Tube Diameter

4.7mm

Inner Tube Diameter

Inner 1.5mm
Outer 2.4mm

Steel Needle Diameter

1.5mm

After Recover Diameter

3mm

Working Temperature

-55 to 100°C (-67 to 212°F)

Tensile Strength

18MPa

Dielectric Constant

2.5

Elongation at Break

700%

Longitudinal Change

±5%

Density

0.94g/m³

Eccentricity

105

Dielectric Strength

25kV/mm

Volume resistance

10¹⁵Ω

Minimum Shrink Temperature

120°C (248°F)

Minimum Fully Recovery Temperature

100°C (212°F)

The post 11.5 x 60mm Fiber Optic Splice Protection Sleeve-Single Fiber, 100pcs/pkg #11857 Supplier in Dubai UAE appeared first on itworld.ae.

This products is made up of cross linked polyolefin heat-shrinkable tubes,hote melt tubes and Stainless steel needle. It is specifically designed for the protection of fiber optical closure.

Description

Length of Tube

60mm

Outer Tube Diameter

3.5mm

Inner Tube Diameter

Inner 1.3mm
Outer 2.2mm

Steel Needle Diameter

1.2mm

After Recover Diameter

2.6mm

Working Temperature

-55 to 100°C (-67 to 212°F)

Tensile Strength

18MPa

Dielectric Constant

2.5

Elongation at Break

700%

Longitudinal Change

±5%

Density

0.94g/m³

Eccentricity

105

Dielectric Strength

25kV/mm

Volume resistance

10¹⁵Ω

Minimum Shrink Temperature

120°C (248°F)

Minimum Fully Recovery Temperature

100°C (212°F)

The post 1.2 x 60mm Fiber Optic Splice Protection Sleeve-Single Fiber, 100pcs/pkg #13662 Supplier in Dubai UAE appeared first on itworld.ae.

This products is made up of cross linked polyolefin heat-shrinkable tubes,hote melt tubes and Stainless steel needle. It is specifically designed for the protection of fiber optical closure.

Description

Length of Tube

60mm

Outer Tube Diameter

5.1mm

Inner Tube Diameter

Inner 3.7mm
Outer 4.2mm

Steel Needle Diameter

1mm

After Recover Diameter

4.1mm

Working Temperature

-55 to 100°C (-67 to 212°F)

The post 1.0 x 60mm FTTH Fiber Optic Splice Protection Sleeve-Single Fiber, 50pcs/pkg #13664 Supplier in Dubai UAE appeared first on itworld.ae.

The fiber optic drop cable protection box is a case to put in a cable with a thermal protection tube after hot melting, so that the splice spot can get a better protection relative to the cold welding. The hot one can improve the performance of connector, increasing the effective connection rate to one hundred percent and prolonging the service life of the product. It is applicable to the network access of drop cable and terminal end output, can be used as both indoor and outdoor cable protector.

Description

Product Name

Drop Cable Protection Box

Applicable Fiber Diameter

2.0/3.0/0.9/0.25 (mm)

Size(LxW)

4″x0.5″ (103x12mm)

Weight

0.005kg

Working Temperature

-40-75°C

Service Lifetime

Over 10 Years

The post Fiber Optic Drop Cable Protection Box #11416 Supplier in Dubai UAE appeared first on itworld.ae.